In order to avoid high temperature and humidity and light, indoor storage is the basic requirements. Regardless of whether the tire is mounted on the rim, the tires must be stored in a clean place, do not expose to sunlight and high-strength artificial lights, avoid high temperatures, radiation (electromechanical equipment) and contact with corrosive substances such as hydrocarbons.
Wet
The warehouse should be cool, dry and properly ventilated. Try to avoid the damp environment. Always check to ensure that the warehouse is not leaking.
If the tires are stored outdoors, they must be covered. With opaque waterproof canvas is better, tires can not have moisture and moisture.
Light and lighting
It is important to ensure that the tires are protected from sunlight and high intensity with strong ultraviolet light. For the inner tube, the indoor lighting to the general fluorescent lamp is better.
temperature
The temperature of the warehouse is below 35 ° C, preferably below 25 ° C. If the temperature exceeds 50 ° C, especially if the stock can not be replaced in a timely manner, the tire surface may appear deterioration and deterioration, and ultimately affect the tire life. To avoid direct contact with the exhaust pipe and radiator. The effect of low temperature on the tire is not long-term, but the low temperature may make the tire harder. So in low temperature conditions to move the tire to be careful, so as not to damage the tire. If the tire is removed from the low temperature conditions need to be used immediately, to make the temperature rise to 20 ° C or so to use.
Oxidation, ozone and chemical substances
Ozone damage is particularly serious, the warehouse should not have any ozone-generating equipment such as fluorescent lamps, mercury vapor lamps, electromechanical equipment or other devices that will produce spark and leakage. Flammable gases and heat generated by chemical sensitization must be eliminated.
Solvents, fuels, lubricants, chemicals, sulfuric acid, disinfectants and the like can not be stored with tires, and the storage of rubber products and flammable materials must be separated and must be stored and managed as required.
Deformation
Tires should be placed vertically in a relaxed environment, to avoid extrusion and deformation, otherwise it may lead to tire cracking or permanent deformation.
Inventory turnover
In order to avoid product deterioration, the tire storage time should be shortened, the original inventory should be shipped to ensure that the inventory of products are the latest production.
